Lcd Tv Spider Web Crack

Cracked LCD and Plasma Screens - We have been seeing an increasing number of people call in that have cracked screens on their flat panel sets. Most of these reported cases are because of the set being physically struck, or falling off from where it is sitting. There are however, rare cases where cracks develop in a screen through a manufacturer flaw - although this is exclusively limited to plasma televisions. In order to understand how this happens and what the repair costs are, this article will explain what happens when your screen is cracked, and what this means for your wallet.Most of the reported cases we are seeing are broken LCD screens. The one main drawback on LCD and LED televisions is that the screen itself is very fragile.

It won't take much more than a hard bump and the screen will be permanently damaged. When this happens, you will typically see a spider web looking pattern, or what appears to be broken glass. What you are seeing in fact, is the glass layer that is inside all LCD and LED televisions that has broken, usually with the impact point clearly visible. This kind of damage is only repairable by replacing the entire display screen. Unfortunately, this is the single most expensive part in the set, with the display panel itself costing hundreds of dollars. By the time additional costs such as shipping and installation labor are added, repairs will almost always exceed the cost of a new set. The only cases in which a damaged LCD or LED television screen would be economical to replace, would be if the set is a very expensive ($2,000 or more), or exclusive model.

We have seen in rarer cases where some screens are gouged or scratched, but not cracked. This type of damage is not as catastrophic, sometimes resulting in the set still being watchable, but the result is the same.the display screen would still have to be replaced to eliminate this. Also, it is important to keep in mind that this type of damage is NOT covered by any manufacturer warranty.

They consider this to be physical abuse, whether it was intentional or not. Extended warranties also will not cover this type of damage.Plasma televisions are generally a little more resilient when it comes to screen damage. They still can be cracked though by direct impact, falling, or improper transportation. Most of the time when a plasma panel is cracked, it will cause the set not to have a picture (but sometimes still have sound), or not to come on at all. Types of plasma screen damage seem to vary, but the visual clues seem to follow one of two patterns.

Most damaged plasma screens that have been struck will exhibit a star like pattern, roughly 1 to 2 inches in diameter. This type of damage will nearly always lead to a no picture or even no power symptom. The second most common type of damage is a stress crack, which usually happens when the set has been overly flexed, by improper transportation, or as a result of an impact that chipped the glass, but did not crack it. When this happens, usually the set will be watchable for a time, but the normal cycle of the panel heating during use, and cooling of during down times will cause the impact point to eventually crack. Regardless of how the damage occurs though, the only way to repair this type of damage, is to replace the plasma panel itself.

Similar to the LCD and LED sets, this is the single most expensive part in the set which would make a repair not cost effective. While the cost of replacement plasma panels have come down, they still cost hundreds of dollars, and when you consider that the the price of new plasma televisions have come down a lot in the last few years, you can begin to see why it is not worth it to repair these sets when this kind of damage has happened. Like the LCD and LED televisions, unless your set is very expensive, or a limited model, they are not cost effective to repair for a cracked screen. This type of damage is also not covered by any manufacturer or extended warranty as they do consider this physical abuse.There are limited cases we have seen on some plasma sets, where there is a glass plate, or filter in front of the plasma panel itself that could be cracked. In these cases, the set still works and has a picture, but has a crack in front of it. This type of damage is repairable as long as the glass filter is available from the manufacturer, and is usually economical to fix. However, in nearly every case we have seen where the filter glass has been struck, the plasma panel cracks first simply because it is under more surface tension than the filter glass.

In situations like this, we recommend calling in to speak with one of our techs to determine if this is the case. The DLP white dot issue - Samsung was one of the first companies to come to market with a DLP projection television and other companies soon followed suit. Currently there are still a lot of DLP televisions out there and one common issue that we have been starting to see a lot of is the so called 'white dot' issue. This problem results in there being one or more white specks on the screen that are present regardless of what channel you are on and what video source you use. What is actually causing this issue is the DLP chip itself which is what actually displays the picture on your screen.

The chip is composed of thousands of tiny mirrors that turn on and off to varying degrees to display a picture. When the mirrors are in the full on position, they turn white. What is happening is the mirrors are getting stuck in the on position and causing the white specks on the screen. In later model Samsung sets (HLR, HLS and some HLT series sets) it had become such an issue that Samsung has decided to fully cover the cost of repair to replace the DLP chip. Now we are seeing more of this problem on other brand sets.

Toshiba and Mitsubishi DLP sets are starting to show this problem. However, Samsung actually designed their sets so that you could replace the DLP chip by itself. Toshiba did not. To date, Toshiba has not made any concessions to assist customers with repairs on this issue. Mitsubishi DLP sets can have just the DLP chip itself replaced to repair this issue, and in some cases they are covering all or part of the cost of repair. If you have a Toshiba or Mitsubishi DLP with this problem, call us and we can explore what service options you may have.

Crack Spider Video

If you have a Samsung DLP with this issue, contact us and we can arrange through Samsung to have your unit repaired.

. Solution Center ». Picture Problems ».

Cracked TV ScreenCracked or Broken TV Screens Can the TV be fixed?In most cases the answer is yes.The hard truth is (whether it's an LCD, LED, OLED or plasma TV) a cracked or shattered TV screen cannot actually be repaired - it can only be replaced. Fortunately, replacement display can be ordered from TV parts suppliers, depending on the make, model, and age of the television. To find a supplier, see. To see what's involved in replacing the panel, read,.

Thermal Crack Tv

Is the TV worth fixing?Most people would simply get rid of the TV and replace it with a new one. But if you really like the one you've got and you want to salvage it, replacing the panel would be a viable option (provided there is nothing else wrong with the TV).It's going to require a bit of effort to make the right decision. You will need to weigh the cost of a new TV against the cost of the replacement panel plus the time and effort it will take to order the part and replace it. Nevertheless, there is money to be saved by replacing the panel yourself. For more things to consider, read How do I know if the screen is cracked?Sometimes it is obvious, and sometimes it is not.

One way to find out is to observe what happens when you turn on the television.If you have an LCD, LED or OLED TV, a shattered screen will usually display a kaleidoscope of disturbing, multicolored, orthogonal lines and shapes in the area where the damage occurred. The picture in the rest of the screen may look perfectly fine, or it may be dim, or it may show no video at all.Plasma TVs will have a more varied behavior with a damaged screen. Some may work just fine with a simple hairline crack. If the crack is more severe, the screen may not even light up. Some may produce a loud buzzing noise.

And other TVs may not turn on at all.There is a common misconception about plasma TVs having an invisible crack, that is, one having no visible sign of damage when the TV turned off. Because the screen does not look cracked, some people will argue that the damage must not have been caused by an external force, but instead by an internal defect. This is not necessarily true. The reason it looks this way is because the screen has a protective outer surface made of a durable, scratch-resistant material.

This outer surface can sustain a physical impact without producing a visible scratch. Yet beneath it there are very fragile layers that can easily be damaged by the same blunt impact. You can read for more information on that.If you decide that the panel needs to be replaced, but you would rather have someone else replace it for you, then schedule a service call and have a TV service technician come to your home and give you a free cost estimate. Damaged GoodsIt is important that you inspect any newly purchased TV once it arrives in your home, especially if the store or online company provided the delivery service. Plug in and test the TV to be sure that it is in good working order before the delivery people leave. It is more believable when shipping damage is reported within 24 hours of a purchase, and if it can be corroborated by the delivery team.

Manufacturer's WarrantiesWhen dealing with the manufacturer, be prepared to thoroughly plead your case. Since it is more difficult to prove that the cause was not your fault, it would be a good idea to call a technician first, because they can do the leg work of contacting the manufacturer for you. Otherwise, you’ll have to correspond with the manufacturer yourself. You would have to send them an email with your name, address, date of purchase, place of purchase, model number, serial number with attached pictures and copy of your sales receipt. You would also have to take pictures of the damage, the front cabinet showing the crack and the manufacturer’s insignia, and the back of unit showing the product sticker.